CW-10/CW-30/CW-40/CW-50/CW-70

Описание

FEATURE:

MULTI FUNCTIONS:
1.By inputting the wire diameter , workpiece material & thickness , and desired surface finish , optimum
cutting conditions are automatically generated from memory.
2.It is possible to carryout the machining conditions of second, third, fourth cutting; the second cutting easily obtained by using the retrace function.
WIRE BREAKAGE RECOVERY:
1.In case of wire breakage during machining, just press button and wire returns to start point.By ressing button , wire will move rapidly retracing machining path back to that point.
WATER COOLING CONTROL:
1.The inverter control for pump and water coolant unit keep the thermal balance on every part of the machine and lowexpansion of material in submerged machining.
WIRE FEEDING:
1.Operator has only to pass wire through lower nozzle guide and wire will be taken by the water-jet wire-collecting device to the collector.
2. Equipped power mos-transistor circuit system. max. out-put current 25 ampere .
REMOTE CONTROL BOX:
1.For the convenience of operator , the remote control box contains many of the functions required for set-up.
2.PC-base designed, CNC Controller with IPC, used G.M. NC-code edit. standard with CF CARD and RS-232c interface.

MACHINE UNIT SPECIFICATION ：(Specifications subject to change without notice)

ITEM	CW-10	CW-30	CW-40	CW-50	CW-70
Machining method	Submerged or Flushing
Max.workpiece size (WxDxH)(mm)	680x420x150	780x500x250	880x500x250	1,000x690x300	1,200x790x300
Max. workpiece weight	250kg	500kg	550kg	800kg	1,000kg
X,Y axes travel	300x200(mm)	400x300(mm)	500x300(mm)	600x400(mm)	800x500(mm)
Z axis travel	150(mm)	250(mm)	250(mm)	300(mm)	300(mm)
U,V axes travel	30x30(mm)	50x50(mm)	50x50(mm)	60x60(mm)	60x60(mm)
X-Y axis feed rate	Max. 900mm/min
Drive motor (X, Y, U, V)	AC Servo Motor
Wire diameter (standard)	ø0.25mm(ø0.15 - 0.3)
Wire tension	200-2500gf
Wire feeding speed	0-15m/min
Best surface roughness	Ra0.65m
Max. taper angle	15°/80
Max.wire bobbin weight	6kg	6kg	6kg	10kg	10kg
Work tank inner dimensios (WxDxH)(mm)	(S)850x573x375 (F)920x573x400	(S)970x719x510 (F)1040x719x450	(S)1070x719x480 (F)1140x719x450	(S)1136x900x530 (F)1272x862x480	1492x972x480
Machine weight	1500kg	2200kg	2400kg	2800kg	4100kg

DIELECTRIC FLUID SUPPLY UNIT (FILTERING UNIT)：

CNC CONTROL UNIT
I/O device	Keyboard, RS-232C, CF CARD
Display type	15" LCD-TFT
Control system	IPC, close loop software servo system
Control axis	X, Y, Z, U, V, (5 axes)
Setting unit	0.001mm
Max. command value	9999.999mm
Interpolation	Linear/Circular
Command system	Abs./lnc.
Machining feed control	Servo/Const. Feed
scaling	0.001-999.999
Auto 2nd cut system	Re-trace and auto changed machining data
Machining condition memory	0-255
Outside dimensions(WxDxH)	600x870x1850mm
Total AC power input	3ø220V 10％ / 13 KVA

Технические характеристики

Отзывы

Больше изображений